Talking about the repairing process of glass machinery

[China Glass Network] Most of the failed glass mechanical parts and equipment can be repaired. The rational use of repair technology in machine repair work is of great significance. In general, repairing parts is more economical than replacing new parts, reducing spare parts reserves, reducing replacement parts manufacturing, saving resources and costs, and reducing downtime for faulty repairs.

The equipment required for the repair process is generally not expensive, and most enterprises can afford it. Therefore, the enterprise maintenance department should be equipped with certain technical strength and equipment, develop its own repair technology, and use socialized and professional equipment maintenance enterprises. Technical expertise will receive good technical and economic results.

There are many types of repairing processes, such as scraping, grinding, mechanical repair, plastic deformation, electroplating, welding, and viscosity. The following factors should be considered in selecting a repair process:

1 Applicability to the material of the part.

2 can reach the thickness of the repair layer.

3 The impact on the physical properties of the part.

4 The effect on the strength of the part.

5 impact on the accuracy of the part.

6 Some repair processes are also subject to the limits of the part structure.

In recent years, electroplating, spraying, welding, viscosity and other technologies have been greatly developed, and have been widely used and equipment maintenance, greatly improving the technical level and scope of application of parts repair.

Maintenance of glass machinery is one of the main responsibilities of the operator to maintain the normal state of the equipment and to carry out the daily work required to extend the service life. The maintenance of glass machinery equipment is completed, which can reduce downtime and maintenance costs, reduce product cost, ensure product quality, and improve production efficiency. Generally, the maintenance work of glass machinery equipment is divided into two types: daily maintenance and regular maintenance.

The daily maintenance of glass machinery equipment includes two types of maintenance and weekend maintenance, which is carried out by the operator. Each class of maintenance requires the operator to do the work in each shift: check all parts of the equipment before the shift, and lubricate according to the regulations; the specified inspection items should be recorded on the check card after the inspection, and then confirm the normal use equipment.

In the operation of glass machinery and equipment, the equipment should be used in strict accordance with the maintenance operation rules. Pay attention to the operation of the equipment and observe the abnormality. It should be handled in time. The fault that the operator cannot eliminate should be notified to the maintenance worker for repair and repair, and the maintenance worker should be on the "fault repair order". Make a maintenance record. Before going to work, use 15 minutes or so to carefully clean and wipe the equipment, and record the equipment status in the handover book, and go through the handover procedure.

Grey Overall

Designing

Our designers will make the sketches of the items strictly, carefully before cutting; according to all the requirements that customers provided. The client has the final word of choosing color palettes, garments, styles, and logo. Moreover, our designers are willing to listen and communicate or even offer some ideas in the process of designing.
Step 2
Cutting & Modification
once the design is finalized, the cutting of sample items is started by our expert cutters. As per the design specifications, our cutters examine, adjust and correct if it is needed. After a few rounds of refinement, we bring out the perfect item sample for the clients to investigate.
Step 3
PRODUCTING
Once the samples are confirmed by the customers, we start the process of producing. All our tailors are skilled and highly trained for producing the exact items that follow the standards and requirements.
Step 4

Packing

All the items are placed in PE bags in carton boxes tidily after ironing. (We also can pack clothes as customer's request)
step 5

DELIVERY

The delivery method is decided by the customers.
The forwarder is either chosen by the customers or we will find the most reliable one we can possibly find after the customers pay the delivery fee in advance.

Fr Overall,Nomex Overalls,Flame Retardant Garment,Fire Retardant Overalls

SuZhou Hayxan Protection Technology Co.,Ltd. , https://www.sz-hayxan.com