[China Glass Net] As an important part of the door and window glass, we should pay attention to the following points when purchasing. Whether it is plastic steel doors and windows or broken aluminum doors and windows, glass is the key. Many consumers only care about glass specifications. Suitcase Zipper,Totes Zipper,Backpack Zipper,YKK Handbag Suitcase Zipper YKK AUTHORIZED DISTRIBUTOR , https://www.ykkzipperdw.com
1. Ordinary tempered glass is safer
If both indoor and outdoor glass are made of tempered glass, the impact resistance and safety of the glass are greatly improved both indoors and outdoors. Because the impact resistance of tempered glass is 5 to 10 times that of ordinary glass, its bending resistance is 3 to 5 times that of ordinary glass, which is safe to get home.
2, Chaoyang or Xitan room heat-absorbing coated glass
In the morning sun or the west sun, you can use the heat-absorbing coated glass on the outdoor side and the ordinary white glass on the indoor side. Since the heat absorbing glass absorbs infrared light, it can attenuate 20% to 30% of solar energy incident, thereby reducing the heat energy entering the room. In summer, the load of the air conditioner can be reduced; in winter, the temperature is raised by absorbing infrared light, thereby It can resist the cold and achieve energy saving. Since the heat absorbing glass is a color glass, the decorative effect is also obvious while saving energy.
3, insulating glass is more energy efficient
Since the thermal conductivity of the sealed intermediate air layer is much lower than that of the glass, the insulating performance of the insulating glass can be doubled compared to a single piece of glass, and the power consumption of the air-conditioned building can be greatly reduced. In summer, it can be insulated more than 70%. In winter, the indoor heating is not easy to lose, and the heat loss can be reduced by 40%, which plays a role of heat preservation, thus turning the summer cool and winter warm into reality.
In winter, the monolithic glass is prone to condensation on the glass surface due to the temperature difference between indoor and outdoor. The thermal resistance of the insulating glass is large, and the glass on the indoor side is not easily cooled in a high temperature environment, so it is not easy to dew. Moreover, the part is sealed, the moisture of the air is absorbed by the desiccant, and there is no dew on the compartment, and the surface of the glass can always be flat and clear.
4, special multi-layer composite hollow glass to increase the safety factor
Because there is a wire or wire mesh as the supporting frame in the middle of the wired glass, it has a certain safety and fireproof function, and is mainly used for inlaying in fire doors, windows, partition walls and other places where fireproof and shockproof are required. Multi-layer composite glass also provides anti-theft, bulletproof and anti-riot performance. This glass is sandwiched or entangled between two or three layers of tempered glass and is referred to as a multilayer composite laminated glass. Since the tempered glass is selected, its impact resistance can be greatly improved, and once it is broken, due to the bonding effect of the intermediate film, the glass slag does not fall off, and still acts as a barrier, and the installation of the special multi-layer composite insulating glass can increase the room. The safety factor of Tibet is the manufacturer of plastic steel doors and windows and broken aluminum doors and windows. All of them use hollow glass required by national standard, energy-saving sound insulation and sealing, factory direct sales, and the price of doors and windows is more affordable.